-
I have two different modules with the W5500 chip and both of them behave identically. They work correctly only when the reset pin is disconnected or reset functionality is commented out (last four lin…
-
Hi,
I am working on W5500 as TCP clinet with STM32.
At power cycle reset I am configuring W5500 with bbelow details and i have read back the configuration details to verify it.
I am debuggin…
-
Hi
I've an Arduino that download a XML file from an IP address and store on SD Card
When I was using sdFat V1.1.4 there was no problems. After update to V 2.0.5 Arduino start to download the file …
-
### Board
ESP32-S3
### Device Description
own ESP32s3-wroom LED output schema
### Hardware Configuration
#define ETH_PHY_TYPE ETH_PHY_W5500
#define ETH_PHY_ADDR 1
#def…
-
I am use the esp32 and w5500 eth module. But I am using a third-party [driver().](https://github.com/Ayyoubzadeh/ESP32-Wiznet-W500-Micropython)
The socket of third-party drivers does not include the …
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
![image](https://github.com/espressif/esp-iot-bridge/assets/26636842/1b801869-73be-49aa-a15d-170582603c4f)
esp32s3加w5500会一直报这个错误 过一段时间后就自己重启
-
When using other library that also declare this enum there is a conflict and triggers a compiler error.
Adding the `#ifdef` fixes the issue as if it's already declared in another include (arduino pic…
-
Some kind of support for ethernet shield would be really nice.
https://www.arduino.cc/en/reference/ethernet
-
*Moved from https://github.com/arduino/Arduino/issues/5867 by @DieterBurandt*
The Ethernet2 (and Ethernet) library supports reading the following parameters from the W5500 board:
- `localIP`
- `s…