-
### CircuitPython version
```python
Adafruit CircuitPython 9.1.3 on 2024-08-30; ESP32-S3-DevKitM-1-N8 with ESP32S3
and latest
```
### Code/REPL
```python
import alarm
import microcontroller as u…
-
I have been searching for an e-ink stock ticker, and I think that this is the only one that stands out, it would be really nice if you would add support because a lot of people come from the pwnagotch…
-
### The problem
Hi,
I am unsure if this is the expected behavior.
I am using a wave share 7.5 v2 display directly connected to an ESP32 from Waveshare.
It works fine so far, but every time it refr…
-
Hi everybody!
my objective: detection and autotracking with ov5647 picam on waveshare pt-hat on pi4 / 4GB or pi zero2 using rpos onvif
this is a user-specified issue, so afaik no bug or similar …
-
i have Waveshare 13.3 inch ePaper with RPI Hat
i try [Test example ](https://www.waveshare.com/wiki/13.3inch_e-Paper_HAT) and it work
But i cant get working ePiframe
in config i set:
`display=epd…
-
Using https://www.waveshare.com/wiki/Pico-2CH-RS232 and [US Solid 3kg scale](https://www.amazon.ca/U-S-Solid-Electronic-AC100V-240V-Measurement/dp/B09X12DCNG/)
EDIT: one Pico-2CH-RS232 is available…
-
**Describe the problem you have/What new integration you would like**
please add additional waveshare epaper models where possible. For my case the 4.2inch v2 epaper board (https://www.waveshare.…
-
Thanks for your efforts. I'm using an Espressif ESP32-S3-DevKitC-1 board with a Waveshare SN65HVD230. I have wired everything as mentioned, however, this is all I see in SavvyCAN.
![image](https:…
-
Hoping this is a simple problem someone can help me resolve. Trying to set up a raspberry pi zero with 32-bit bookworm and a 7.8" Waveshare IT8951 display, in order to run SlowMovie.
Hardware passe…
-
**Describe the bug**
There are display issues using the following hardware:
* Raspberry Pi 5
* Official 7" Touchscreen Support
First, the display does not function until overlay is added. Then, …