-
Since the installation of the RC1 my pwnagotchi does not display correctly anymore.
I think one reason is, that the display is no longer reset when the gotchi starts (or at least it looks like this)…
-
I have installed OctoPrint-TFT following all the details from #3.
Waveshare 3.5" display is installed and working.
Octoprint is up and running ... can also connect via browser from other PC.
Unforu…
-
Hi.
I have SSD1327 128x128 form waveshare.
The library working on SPI.
Unfortunately I2C does not work.
The display does not light anything.
I checked example code from waveshare and it works.
O…
-
Hello,
After running
"cmake -DCMAKE_BUILD_TYPE=Release -DSPI_BUS_CLOCK_DIVISOR=8 -DADAFRUIT_ILI9341_PITFT=ON .."
I am given:
-- The C compiler identification is unknown
-- The CXX compiler…
-
Just bought the screen, and found this out.
I got it to work following the instructions that came with it, but only if it's with a fresh install of 2017-04-10-raspbian-jessie.img
As soon as you …
-
First off: I'm _very_ excited to see the topic/mesa-lima effort!!
It builds fine, but I haven't been able to see anything. I tried two different HDMI devices and both failed. The first is a [Vizio …
-
Hi,
I have done some updates on my Raspberry and now Chromium does not start any more. The problem looks to me very similar as described here:
https://github.com/BillyBlaze/OctoPrint-TouchUI/issu…
-
Hi,
I was wondering, is it possible to use the waveshare 3.5" (A) display with a pi zero?
I tried multiple things, including the dtoverlay from [swkim01/waveshare-dtoverlays
](https://github.com/…
-
1. Amazing work here. Thank you!
2. I don't know where else to go with this. Hopefully you can assist. All information I have follows.
> Setup a Waveshare 3.2 with Raspberry Pi 2 B
>
> I ha…
-
Hi, I've used this method on a Pi1, using the latest Raspbian from Noobs. I've added
`fbcon=map:10 fbcon=font:ProFont6x11 logo.nologo`
on my cmdline.txt and i could see the console boot up messages j…