-
Hey, thank you so much for developing this!
I've been trying to set up this component recently, using a Wemos D1 Mini esp32, thehognl opentherm shield, and a Viessmann 050-W combi boiler.
Howeve…
-
### Describe the bug
Good day everyone. I began working on adding support of OpenWrt on my [ZTE MF289D](https://github.com/Kroustalo/OpenWRT-ZTE-MF289D) Since the router is similar to the MF289F [upl…
-
I'm using an Arduino nano with an ESP8266 for wifi which I have working for other WiFi projects and I'm trying to subscribe to my mqtt broker on Debian 12 and receive messages.
I never receive anyt…
-
I am using WebServer_ESP32_SC_W5500 library over a custom board based on ESP32-S3 ( and another on -C3) with attached SPI TFT display, a LoRa RTX attached to the SPI bus and a W5500 for having the…
-
# Sniffing WiFi APs with Flipper Zero and WiFi Dev Board
[https://michaelriedl.com/2022/12/05/flipper-zero-wifi.html](https://michaelriedl.com/2022/12/05/flipper-zero-wifi.html)
-
**SD Card Mounting Issues**
I still cannot mount an SD card to my dev board no matter what card type I use. I've bought a gigastone 32gb from amazon, a sandisk 32gb from walmart. Unable to mount SD c…
-
**Describe the bug**
WiFi Marauder program on Flipper Zero is scanning the WRONG WiFi network when you're doing something like Sniff (with "pmkid" option). And yes, of course I double checked I selec…
-
I am fairly new and any help would be appreciated.
I am using the Heltec WiFi Kit 32(V3) with the Arduino IDE version 1.8.19 and I am able to load other sketches that utilize wifi, OTA, Etc.. I …
-
### Board
ESP32-S3-DevKitC-1-N8R2
### Device Description
.
### Hardware Configuration
..
### Version
v3.0.4
### IDE Name
PlatformIO
### Operating System
Windows 11
…
-
I try to connect the ESP-01S module to the SKR-1.4-turbo Wi-Fi connector on the board, but to no avail.
But connection to TFT connector on the board works well (It has RX,TX, RST and only 3.3v I get…