-
I think it could be useful to have the possibility to choose between sending the payload over lora or wifi.
In many countries lora has still some problems and this option could really benefit this pr…
-
The wifimanager part works just fine for me, it connects successfully to my network but after that I can't reach any of the routes. I tried every route with the specified http method. The device ip ad…
-
### Describe the bug
Unable to load the mt7922 driver correctly on my CM4 development board, using the CM4-WiFi7 by mcuzone motherboard
Below are the pertinent logs:
```
[ 0.253979] pci 0000…
-
```
wifi mode enable/disable adb configuration in preferences
```
Original issue reported on code.google.com by `gaetan.e...@gmail.com` on 22 Aug 2009 at 8:44
-
Some of us have wifi that isn't broadcast so we need the phrase `ssid_scan=1` in the wpa_supplicant file.
-
PIO Core Call Error: "The following files/directories have been created in C:\\Users\\rodla\\OneDrive\\Documents\\PlatformIO\\Projects\\240628-100249-heltec_wifi_lora_32_V3\r\ninclude - Put project he…
-
Problem: There is currently no way to select the wifi network from which to display connected clients.
Unifi APs can broadcast multiple wifi SSIDs. For Example the Chime being assigned to "Unifi W…
-
In some cases, it might be useful to have different wifi configurations for a node within a system. Meaning, this node does not use the wifi configuration of `system.conf`, but in `node.conf`. For exa…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
1. Move Jumper (in Wifi Module)
0: In side
1: Out side
2. Connect Arduino to the PC
3. Open Arduino IDE
4. Open the Serial Monitor
5. Change Baud Rate '115200' and 'Both NL & CR'
6. Write down '…