-
Can you add ability to change antenna power in Z2M?
I have one sensor at a fairly large distance from the Zigbee stick and some data loosing. It would be a good idea to manually control the TX ant…
-
Implement support for V5 protocol as used in new embedded ethernet loggers.
Needs documentation from Omnik and or iGEN / Solarman.
This is requested.
Also a firmware update file is requested.
-
Hi,
for me, the integration is not working since [v0.9.9.18].
I got either no data and the entities shows `unavailable` and the Integration is initializing or the entities shows a value but did n…
-
as subject says
Thanks
-
![20200909_152854](https://user-images.githubusercontent.com/65537552/92604911-5d7fa100-f2b1-11ea-9709-1bbac0a0009a.jpg)
**Operating environment/Installation (Hass.io/Docker/pip/etc.):**
Has…
-
I put the same sd card (running debian 8 jessie, kernel 4.1.19) from the raspberry pi 2 with usb wifi (EDIMAX EW-7811UN Wireless USB Adapter, 150 Mbit/s, IEEE802.11b/g/n) into the new raspberry pi 3 u…
-
**Describe the problem you have/What new integration you would like**
The Lyligo T5-4.7inch is a great e-paper module based on an ESP32. It has a resolution of 960*540, 16 gray level and support …
-
### Describe the bug
I have an iPhone 15 Pro on iOS 17.2.1, and running ESPresence 3.3.1. I click Enroll in ESPresence, and I only get a 'regular' Bluetooth pairing prompt in iOS, not a "secure" prom…
-
### The problem
I am commonly seeing my USB device (Aeotec Z-Stick 7 Plus) report being "Jammed" and then shortly after report being "Ready." Around this time, any operations will fail to occur and t…
-
Repurposing this issue for the discussion that it started. Was originally a question about connecting, and turned into a discussion about deciding the sensor data.
---
In the blog post, you ment…