-
Hi, just wondering how this could fit in.
I'm working on a esp-now project where the master is controlled by a raspberry pi, for this to work i created an ESP32 as bridge between the ESP-NOW networ…
-
### Checklist
- [X] Checked the issue tracker for similar issues to ensure this is not a duplicate
- [X] Read the documentation to confirm the issue is not addressed there and your configuration is s…
-
**Describe the problem you have/What new integration you would like**
Please consider making ESPHome firmware as a Zigbee to MQTT bridge/gateway on hardware like ITead Sonoff Zigbee Bridge (S…
-
Hey guys I know that this driver tool was not meant for correct kernel issues with the Realtek b852 chip, however I wanted to give it a shot since this is the only driver set that stalls without any i…
-
Here's the problem I've got
```log
Take all parameters from the command line
* usb_modeswitch: handle USB devices with multiple modes
* Version 2.5.2 (C) Josua Dietze 2017
* Based on libus…
-
Dear all,
Nodemcu with ESP8266 with dcservoESP_wifi.ino sketch.
Motor turns on and off. I've checked encoder connections , connections to H bridge, power.
Somehow I see this in serial monitor. Mo…
-
>I assume USB/IP is more advanced topic, not for beginners, so it requires at least basic knowledge about esp-idf and using esp32-S2/3 with USB. As i am no longer using windows (at least not for devel…
-
Using the kernel from upcoming Fedora 40:
```
$ ls -ld /sys/class/mtd
drwxr-xr-x. 2 root root 0 Jan 13 20:31 /sys/class/mtd
```
However,
```
$ ls -l /sys/class/mtd
total 0
```
Any chance of …
-
Suggest maybe add template for passing settings parameters via DNS TXT record to [Home Assistant's ZHA integration component](https://www.home-assistant.io/integrations/zha/).
@thegroove Follow up…
Hedda updated
2 years ago
-
**Describe the bug**
Any command with envycontrol produces error
**To Reproduce**
Steps to reproduce the behavior:
1. Run `envycontrol --query`
2. See error:
```
> envycontrol --query
Trac…