-
La commande `PTEC` (cluster `0x0702` attribut `0x0020`) utilise un type `string` alors que la spécification de la ZigBee attend une `enum`.
Cela empêche une intégration avec zigpy (et donc ZHA dans H…
-
### The problem
After the update to 2024.8.x, the Zigbee thermostats no longer accept temperatures below 5.0°C. This is not an error in principle, as the minimum heating setpoint limit on the devices…
-
### For firmware version 0.1.2.1+
ClusterID: 0x0204 (Thermostat User Interface Configuration)
Attr: 0x0100, INT16 (id:0x29), Temperature offset, in 0.01° steps, range: -32767 (-327.67°)..32767(+32…
-
zigpy's (new) radio API support unified commands for Zigbee network backup and network restore; will [zigpy-zboss](https://github.com/kardia-as/zigpy-zboss) support this?
* https://github.com/zigpy…
Hedda updated
4 months ago
-
### The problem
I recently bought a couple of extra Sonoff Zigbee devices to add to my network but, when attempting to do so, I found myself unable to have them join.
At first it all seems like …
-
### Problem description
I've just bought a couple of these from Aliexpress (https://www.aliexpress.com/item/1005007335302133.html) and have been playing around to see if they work in HA / ZHA. I cop…
-
Applying brightness value 1 to a Hue light turns it off. In the UI it seems to be still "on" but the actual light is not on anymore.
![CleanShot 2024-09-30 at 20 04 59@2x](https://github.com/user-att…
-
### The problem
I have a zigbee rgb bulb, model TS0505B by_TZ3210_katchgxy and with the lastest version, I’m offered a firmware update. On accepting, it instantly errors with the message ‘ Failed t…
-
### The problem
!!English translation, show German language below!!
After I have exceeded the limit of 100 devices in my Zigbee network, there are considerable problems.
- Devices sporadically …
-
Hello, recently i bought some sonoff trvzb's and looking for implementing an external sensor calibration for them and found your project, but after installing blueprint when i hit run, nothing happens…