-
Hi cyberman
I need support to get PAXCOUNTER jointed via OTAA.
HELTEC Lora 32 V2. 10m away from the Lora 8 chanel gateway.
The join works by using a OTAA demo sketch after some seconds.
The demo…
-
I'm trying to use the `arduino-lmic` library within a PlatformIO project.
My `platformio.ini` looks like this:
```
[env:megaatmega2560]
platform = atmelavr
board = megaatmega2560
framework …
-
I am currently testing a new node-to-node communication form, LORA direct. (no WAN)
@TD-er
I am suggesting the following data structures:
```
struct Lora_SysInfoStruct
{
byte header = 255;…
-
Hi cyberman,
I got my problem back with my HELTEC LORA 32 v2 device and I got the feeling, that this hardware is not good for the paxcounter.
https://github.com/cyberman54/ESP32-Paxcounter/issues…
-
Running the basic test fails under CP3..0 alpha (current master)
It works under CP 2.2.4
Same boards, only change is reloading CP and libraries.
```
Adafruit CircuitPython 3.0.0-alpha.3-31-g8b…
-
Need to add platform support for Catena 4630.
-
### Hardware:
Board: TTGO-LORA32-V2.0
Core Installation version:
IDE name: Arduino IDE
Flash Frequency: 80 MHZ
PSRAM enabled: no
Upload S…
-
I am trying to run a minimal example as suggested in #122. I can see a join accept in the TTN console but the device does not receive any events. Here is the full log:
```
[DBG ][LSTK]: Initiali…
-
So, after trying to set up (without success) the mkrwan with a single channel gateway I am asking if someone has been able to do that?
Currently the mkr fw doesn't have the option (like the uno's) t…
-
Hello,
Please add our library to the Library Manager.
https://github.com/allthingstalk/arduino-lorawan-sdk
(Hopefully, it's ok that the latest 3.0.0 tag is not pointing to `master` - we need …