-
Some I2S codecs require a MCLK signal which is 64/128/256*fs. This signal needs to be aligned with the bit clock (BCLK).
Adding master MCLK support would extend the support to many more widely availa…
-
Hi,
I have installation errors following #36 for a Pico W board. I'm using vscode version 1.74.2 and ubuntu 20.04.
See output:
```
error: unable to write file SVD/EFM32GG12B/EFM32GG12B530F…
-
Add support for RP2040 WDT and Deep Sleep modes
May have to be implemented from the Pico SDK, which is OK because it can be linked within the Arduino core.
> A complete copy of the Raspberry Pi Pi…
-
Regression caused by #1204
```
In file included from /home/oddstr13/Arduino/hardware/pico/rp2040/cores/rp2040/Arduino.h:30,
from /tmp/arduino_build_702994/sketch/constants.c:1:
…
-
Thanks for making an Arduino wrapper for the Pico W bluetooth functionality. I am trying to compile iBeaconScanner.ino in the BTstack folder with board v.3.1.0, which I understand is beta/alpha howeve…
-
### The problem
I get a compilation error after including
climate:
- platform: climate_ir_lg
name: LivingRoomAC
receiver_id: infraRx
transmitter_id: infraTx
sensor: LroomTe…
-
The following code does not display anything in third party serial monitor programs until any character has been sent.
Tested with: tio, screen, pyserial-miniterm, putty
But everything works if you …
-
Support Raspberry Pi Pico Arduino core, for all RP2040 boards ([Earle Philhower's Arduino core](https://github.com/earlephilhower/arduino-pico))
-
I have created a wrapper library that works with the arduino-pico Arduino core: https://github.com/obdevel/ACAN2040
It has received some limited testing and will sustain 1000 msgs/sec at 125kb/s bu…
-
I have set `-DDEBUG_RP2040_PORT=Serial1` as well, and have a uart hooked up to pins 0 and 1, but when i use `printf("test\n")`, i get a isr_hardfault. I am using platform.io
```
Thread
1 receiv…