-
The following text is a request from Emmanuel Ardillon in the EDF internal bug tracker:
Subset simulation is available in OpenTURNS, but it does not appear either in the "Theory" part of the doc or…
-
following are cases where uberon uses a different relation from ZFA. Note that neither is definitely right nor wrong. Nor is it the case that the relations must match. However, for each substitution t…
-
I am performing a basic simulation and reconstruction experiment to check if the HU of water and air are set to 0 and -1000.
Using the most of the default configuration parameters, simulating a wat…
-
```
Hello,
first of all thanks for this module. I really appreciate the effort and
enjoy working with it.
I encountered a problem reading a DICOM RT Ion Plan Storage file (UID
1.2.840.10008.5.1.4.…
-
@mgh128 wrote: Section 7.3.7.1.2 of the current draft EPCIS 2.0 standard specifies the structure of a SensorReport, for the expression of relevant business-relevant sensor data accompanying an event.
…
-
Hello, after I reconstructed it with your network, why is the reconstructed image getting closer and closer to the blank image
`
After running `minimalCIL.py` @ [https://github.com/samdporter/SPECTissues.git](url)
CIL's admm causes failure. OSEM reconstruction works OK.
Ran valgrind &…
-
Opening this issue to discuss the creation of a "Lesion protocol" section.
This paper was mentionned in the discussion : [(Carass et al. 2024)](https://www.sciencedirect.com/science/article/pii/S2…
-
When you print results of say a ultimate bending analysis to the terminal, the resulting table values are consistent with the analysis units, for an SI analysis N & mm.
I feel having a way in these…
-
Are there practical differences between cylinders and AABBs? I've been playing around with this for a while, and they both seem to behave pretty much the same all around.
I noticed they also both h…