-
Hello,
I built up two of the tinnymodbus. Flashing over modbus works fine. I can also read out the internal voltage (0x03 0x0003), the internal temperature is too high.
I tested with a DS18S20 and …
Fux2 updated
7 months ago
-
So i recreated the project exactly the same way built here, but after i upload the code the display doesnt show anything, and when I unplug the USB cable the red light goes out (ig thats normal) but t…
-
A new version (2.2.6) of `lengau-codespell` was just pushed to the `latest/candidate` channel [in the snap store](https://snapcraft.io/lengau-codespell). The following revisions are available.
CPU Ar…
-
Implementation and Integration of I2C based BME280 with RPi 4.
DOD: I2C driver is working correctly with RPi 4 and able to receive the temperature, humidity and pressure readings from the sensor with…
-
I had gpio working with "AllSky"; decided to check out "Indi-Allsky" and am getting the following error (I have a dew heater and fan devices installed and setup; I re-ran setup script to make sure gpi…
-
please could somone guide me though the procedure on running the python programm all-values.py from the sample programs
bit new to the pi and what sudo etc amd what program i use to run to work the b…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
A new version (2.3.0) of `codespell` was just pushed to the `latest/candidate` channel [in the snap store](https://snapcraft.io/codespell). The following revisions are available.
CPU ArchitectureRevi…
-
Hi bblanchon,
how can i send a serialized json data to a server(esp8266)?. Can you help me with it?
Thanks for the good job on ArduinoJson.
Regards,
lcfelippe.
-
Hi,
First of all, I would like to thank you for the cool project. Super work! 😎
Unfortunately I have a problem with the SGP30 sensor. I built and programmed everything as you described in the re…