-
Hello,
First of all thanks for all great work.
I'm having an issue pairing a CC2531 with Router firmware (**router1**) that should be paired to another CC2531 Router (**router2**) which this one…
-
Hello,
sorry for asking stupid question, but I'm obviously not clever enough to understand.
If I flash regular (not a source routing one) coordinator firmware to CC2531 and router firmware on t…
-
### PROBLEM DESCRIPTION
I'm using a Wemos D1 Mini and a CC2530. I build my own firmware with the Zigbee flag enabled. I can select the Zigbee parameters in templates so I believe the firmware build…
-
Hi
just for informations, i've just seen that sonoff distributes a zigbee component :
https://www.itead.cc/sonoff-basiczbr3.html
I'd like to try this one with my zigate when it could be possib…
M4t3o updated
4 years ago
-
Hi
I'm trying to control my Eurotronic Spirit Zigbee thermostats from zigbee2mqtt. Getting data from the thermostat works fine, but sending messages to the thermostat does not work. Or if it …
-
So Im starting a project for making an Air Quality sensor (how original), which will basically be an ESP32 with different sensors (CO2, PM2.5, O2, etc) in a box.
I would like to find out if it would …
-
# Bug Report
## What happened
Can't control Aqara ZNCLDJ11LM Curtain Motor. Open (Up), Close (Down) and Stop do not work.
Add-on log:
```
Zigbee2MQTT:error 2020-08-20 09:45:28: Invalid …
-
# Bug Report
## What happened
Publish 'set' 'state' to device failed after coordinator is resetted
Error: Command 0x00158d000398e6b7/1 genOnOff.off({}, {"timeout":6000,"manufacturerCode":…
-
### PROBLEM DESCRIPTION
_A clear and concise description of what the problem is._
Repairing fails after coordinator was off for an extended period of time.
### REQUESTED INFORMATION
_Make sure…
-
When some low power End Devices choose the Coordinator as their parent, they may have issues if ZStack is restarted.
This is caused by ZStack requiring resolution of the IEEE address for any event.…
pwood updated
4 years ago