-
### Expected Behaviour
Logger should work with AoT trimming enabled.
### Current Behaviour
The following exception is thrown
```
10-Oct-2024 9:34:07 AM 2024-10-10T13:34:07.448Z 9bc362e6-76bc-4f22-b…
-
When we run `pip install ml-metadata` with versions 3.11 or newer it doesn't install `ml-metadata==1.14.0`. We get `0.13.1.dev0` installed. And if we force 1.14.0 with `pip install ml-metadata==1.14.0…
-
I made simple stupid blinker on PA0 for ch32v203. It works fine.
My issue that when it assembled with clang instead of GCC it creates bit different elf file which somehow magically erase/disable inte…
-
For example, I want to set up a simple text-file-based config to set the default editor to vim.
At present I need maintain [150+ lines of python](https://github.com/jonathanslenders/ptpython/blob/m…
-
```
What steps will reproduce the problem?
1. I have uploaded the sketch to the chip.
2. I connected the Sync to Pin9 with 1KOhm and the Video to Pin7 with 470Ohm.
3. I connected the RCA-Cable (center…
-
```
What steps will reproduce the problem?
1. I have uploaded the sketch to the chip.
2. I connected the Sync to Pin9 with 1KOhm and the Video to Pin7 with 470Ohm.
3. I connected the RCA-Cable (center…
-
```
What steps will reproduce the problem?
1. I have uploaded the sketch to the chip.
2. I connected the Sync to Pin9 with 1KOhm and the Video to Pin7 with 470Ohm.
3. I connected the RCA-Cable (center…
-
```
What steps will reproduce the problem?
1. I have uploaded the sketch to the chip.
2. I connected the Sync to Pin9 with 1KOhm and the Video to Pin7 with 470Ohm.
3. I connected the RCA-Cable (center…
-
```
What steps will reproduce the problem?
1. I have uploaded the sketch to the chip.
2. I connected the Sync to Pin9 with 1KOhm and the Video to Pin7 with 470Ohm.
3. I connected the RCA-Cable (center…
-
```
What steps will reproduce the problem?
1. I have uploaded the sketch to the chip.
2. I connected the Sync to Pin9 with 1KOhm and the Video to Pin7 with 470Ohm.
3. I connected the RCA-Cable (center…