-
### Application Version
5.2.1
### Platform
Windows 10
### Printer
None
### Reproduction steps
1. Start Cura
### Actual results
Nothing happens except loading cursor
### Expected results
Cur…
-
I used Cura 15.04 to make a model; however, Microprint didn't like it. Is there a solution to this issue? I've attached a screenshot below:
![screen shot 2016-06-20 at 1 42 02 pm](https://cloud.github…
-
Hi,
the slicing process fails if there are more than 10.000.000 vertexes or 3.000.000 faces on the buildplate. Cura / the slicing engine seems to need more tahn 4GB of RAM at this point and crashes, s…
-
### Application Version
5.0.0
### Platform
Windows 10
### Printer
Creality CR-10S
### Reproduction steps
Downloaded 3D model from thingiverse
Opened fresh install of Cura 5.0.0
Loaded file in…
-
### Application Version
5.1.0
### Platform
Windows 10
### Printer
Anycubic Mega X
### Reproduction steps
Open Cura, open file, select an STL file, multiply selected by some number 2-6, slice, s…
-
I have my printer set up with ABS on one side and PETG on the other.
FlashForge Creator Pro 2016
Cura 5.0
When I go to print using the left (PETG) extruder, with the right extruder disabled, bot…
-
Hi,
I am experiencing problems slicing large (but clean) meshes. The win64 version from UM site reports invalid file, the Linux version loads everything just fine and I can scale, move, ... But if I …
-
Will it be possible to change Nozzle's Animation Speed to match that of the print speed in mms or what ever we chose to? it seems the animation on my 3.1 is very slow and not related to print speed se…
-
**Application Version**
3.6 (same in older versions)
**Platform**
Win10/64/ssd
**Printer**
CFFFP
**Steps to Reproduce**
Start cura clean - without any model loaded.
**Actual Results*…
-
**Application version**
(The version of the application this issue occurs with.)
**Platform**
(Information about the operating system the issue occurs on. Include at least the operating syste…