-
hi mungewell,
i've been talking to shooking, and we're both trying to get some comms happening with the zoom gce-3 and a pi, just wondering if your code can easily be adapted for it.
it seems to…
-
First - thanks for a great code. Today we have minus prices and I guess the code isn't support that?
Logger: homeassistant.components.automation.el_pricesink
Source: helpers/script.py:504
integr…
-
One of the bottlenecks of this library is the ability to parse vendor wavesforms correctly. The current approach is to convert a .wbf file to a json-like format with the mod from fried-ink, then to us…
-
Hej folks,
I've ordered components + PCB for the Yellow AP and put one together today.
Installed firmware through https://install.openepaperlink.de/, which went fine.
Booted, connected to wifi…
-
Hi, Guys
I have a very strange issue when add some lines in the void setup then then get this message
Attempting MQTT connection…failed, rc=-2 try again in 5 seconds
int R1 = D0;
int R2 = D1;
…
-
**Describe the bug**
When detecting an event from the RGB tag, (BUTTON1/BUTTON2) the automation fails to execute.
Errorcode shown in the automation trace timeline:
Triggered by the event 'open_ep…
-
I've been working on a way to hasten the partial refreshes on my GDEH029Z13 display (2.9inches, Tricolor BW+Red ePaper display).
I've ended up understading the driver chip has 60-bytes LUTs (not 4…
-
# Introduce the problem
Combining lvgl and epdiy, we facing a problem: the pixel need to convert to color of epaper (16 grayscale colors, 0~15), when using `set_px_cb`, the painting will be very sl…
-
### The problem
Not using many sensors: 28 (text and normal sensors from Home Assistant). When adding 29th it goes into a bootloop. I can still have logging. No difference if I completely switch logg…
-
### The problem
I can´t update Firmware on ESP32 after update to ESPHome 2023.12.0 in HomeAssistant. I get the error "ValueError: Component ID eink_display was not declared to inherit from Component,…
Nicxe updated
7 months ago