-
Secure connection
-
When I compiled the firmware, the Esphome shows the log as below, it seems that some of the configuration of climate has been deprecated.
> Compiling .pioenvs/opentherm_gateway/src/esphome/componen…
-
Hi,
I'm using a simple fileupload to littleFS partition.
input type="file" name='filesystem' webkitdirectory mozdirectory
server->on("/doUpload", HTTP_POST, [](AsyncWebServerRequest *reque…
-
### The problem
After programming the D1 mini V3 reports Event: Disconnected ssid='Slartibartfast' bssid=DC:15:C8:66:B0:38[redacted] reason='Auth Expired' with my Fritz.box 7530AX router.
### Which …
-
Add HTTPS implementation for encrypted data transfer, as well as authentication mechanism - username+password, auth-key etc.
-
Hi,
I recently started creating an esphome component for reading data from dlms encryped smartmeters. (used a lot in Austria)
Great thanks to DomiStyle(https://github.com/DomiStyle/esphome-dlms-me…
-
Hi
I want add the Toshiba FlashAir W-04 16Gb (Wifi module + SD card)
https://www.flashair-developers.com/en/discover/overview/
in the ender3 with this microsd/SD adapter
![](http://img.d…
-
### Board
ESP32, ESP32-S2
### Device Description
I'm using "mini" style boards of ESP32 and ESP32-S2
### Hardware Configuration
none
### Version
v3.0.0
### IDE Name
ARDUINO
…
-
Hello
I tried using the AsyncCam example but I get very poor fps (1-2fps). When i use the standard example from espressif I get normal fps. Changing resolution doesnt help. I have an AI Thinker boa…
-
I have printed all the stl's and have found that the clearances to be extremely tight. For example the conical top needs a couple of millimetres added to the side skirts. I had to use a knife to carv…