-
(Rough draft 9th September 2014 - to be improved)
## Summary of recent development
Emoncms development in the first half of 2014 focused on improving the data core of emoncms, how timeseries data is …
-
Printer: Makerbot Rep 2X
Firm: Sailfish v7.7
Slicer: Simplify 3D 3.1.1
Printing gcode from Raspberry pi local via Octoprint 1.3.1, GPX 2.5.5
I can print successfully with Octoprint and the GPX p…
fform updated
7 years ago
-
Hi!
I have two Sonoff LEDs running, and one of them seems to fail. It starts ok, but after a while it starts to restarts itself.
I have also noticed, that as soon as I redirect my browser to the w…
-
Sometimes when I restart openHAB I get a FileNotFoundException in the logs and any rules in that file do not load. A simple 'touch' on that rule file forces openHAB to load the rules and everything is…
-
Which software are you using to talk to the ESP8266 (send commands, receive information)?
-
Matching those in "current Energy" with those in "Fuel requirements"
Otherwise Figure 10 is not representative
-
Hello,
I am playing with the internals of scatter text to utilize Bokeh as the front end visualization. I found for larger corpus's the time for the javascript to load to be excessive. With Bokeh …
-
I know, it is kind of a support question, but I am googleing all day and find nothing and hope you've encountered this before. I have build two new quads to fly with 4s and 3s batteries. I've build in…
-
Hello,
Here is my knx_config.json
The KNXReadRequests values are working for the first and the last device. Any idea why it's not working with the second and the third device ?
Thanks in adv…
-
After the print was done, head didn't move away from printed object, didn't turn fans and gpio, a kept nozzle temperature.
I'm attaching gcode generated by cura and slic3r (happed both times) and ser…
ra100 updated
7 years ago