-
Hi @dariuszparys and @varunpuranik ,
Now I'm repeating the steps as suggested in #576 in a (new, but completely) copied `azureiotedge-simulated-temperature-sensor` project:
I've removed the prev…
-
I'm running on a RPI 3 domoticz build V3.9379
It randomly stops working every couple of days, sometimes multiple times a day. The domoticz log tells me this:
2018-05-01 03:02:35.865 RFLink: 20;33…
-
Is there a way to use 2 temp sensors and designate 1 as a wet bulb, and have it calculate RH?
I've used BME280 and DHT 22 sensors, both of which have trouble recovering from condensing fog which is…
-
Hi,
I've been tinkering around with various setups and mycodo for a few weeks now and thought I'd give a little bit of feedback. I'm totally aware that there are many different scenarios, so my f…
fry42 updated
6 years ago
-
So I cannot get any value on any machine that has 11 or more GPU.
the temp value and fan value is always 0 0 for GPU10 GPU 11 and GPU12.
-
Hi,
I managed to add a temperature sensor and add a cooling fan at a particular GPIO (simple transistor switching circuit). The relation between the set temperature and the start of the cooling fan…
-
Hello, I'm seeing that pjon is growing more and more. And with IOT getting very hot nowadays, are there plannings in implementing a routing protocol to use pjon in LoRa or similar radio modules? (Righ…
-
I have been doing a bunch of reading and research on what is the appropriate code to use for configuring attribute reporting time intervals. What I found should be used is:
`zigbee.configureReporti…
-
## Expected Behavior
Don't show erros in the plugin output, only the result. The same like running script.sh 1>/dev/null 2>&1 (or some log file).
## Current Behavior
Sometimes the scr…
-
#### Hardware
Hardware: ESP 12E development board
Core Version: 2.4.0-rc2
### Description
system working well locally on home network but will not work on a remote network.
Nothing t…