-
**Application version**
4.6.1
**Platform**
Windows 10 X64
**Printer**
Anycubic I3 Mega s
**Reproduction steps**
1. Open Preferences
2. Show Profiles
3. Select another profile with diffr…
-
### Description
I have upgraded my Anycubic Mega i3 Ultrabase to direct drive. Everything is working so well and I thought it would be time to setup linear advance by using the Marlin pattern…
-
There is a board on ESP32. Compiled the firmware based on Marlin 2.0.9 and Esp3dlib. But there is no connection between the WEB interface and the firmware. A similar GR BL firmware works on this boar…
-
## What did you expect to happen?
All files are uploaded
#### What happened instead?
Sometimes the files are ignored (2-3 per week if i upload 3 Files per day)
#### Version of OctoPrint
1.3…
-
#### What were you doing?
I installed octoprint with the image, updated the system and attached a logitech webcam and connected the printer with the delivered USB- Cable.
#### What did you expect …
-
#### If this is a feature request describe it here
FEATURE_REQUEST_DESCRIPTION_GOES_HERE
#### Version of Octolapse
Octolapse Version: 0.3.4
#### Version of OctoPrint
OctoPrint Version: …
-
**3.5.0**
**Windows**
Nvidia Quadro M500M, Nvidia Quadro M550
**Anycubic I3 Mega**
**2 different Computers, the same Version, 2 different slices**
**On 1 Computer everything is fine, on…
-
If mesh bed leveling is enabled, the execution of any move that includes movements in X or Y will cause a reset. Movements in Z are not affected and can be executed. This exists up to the most recen…
-
### Bug Description
Hi. I'm unable to set Z position in LCD menu, but also positioning instruction provided in the readme file doesn't work. I have sent those commands, saved, rebooted and Z axis i…
-
### Description
Firmware: Marlin 1.1.9
Hardware: Anycubic I3 Mega modified with BLTouch - Using the Trigorilla Board
Problem: When using G28, the bed is able to home correct on X, Y and Z axis
…