-
Hi
i have an LED with tunable white connected via DALI to KNX.
It´s an ABB-DALI interface and a Lunatone DALI Dimmer (LUNATONE 89453833 DALI DT6 2-Kanal LED Dimmer CV)
The Relative Color Temperatur…
-
Hi,
I am running a fresh install of Home Assistant OS on Raspberry 5 (HA Core 2024.3.0), with the KNX integration installed (v 2.12.2).
Trying to import my ETS6 Project file unfortunately system…
-
In the Selfbus Updater, we're using calimero (currently version 2.5.1) to send a Master Reset with special Erase Code and Channel to instruct the device to reboot into its bootloader. The code is basi…
-
**Describe Your Problem:**
I'm just trying to setup this plugin with my Somfy RTS blinds but they're not being detected as blinds? I'm assuming blinds = screens but I could be wildly mistaken s…
-
Hallo zusammen,
zunächst einmal finde ich das Projekt richtig super! Vielen Dank dafür an den/die Entwickler.
Ich habe folgendes Problem:
An meinem Aufstellungs-/Verwendungsort ist es leider …
-
**Describe the bug**
vacuum_goto not working (vacuum does not leave docking station)
vacuum platform is set to tasshack/dream-vacuum
**To Reproduce**
Trigger a goto-action
**Expected behavi…
-
Ich habe versucht, mein Projekt zu aktualisieren. Der Vorgang dauert ewig (zeigt "Wird aktualisiert..." bzw. "Wird importiert..." an), wenn ich nach 5 Minuten von den Einstellungen weg und wieder zurü…
-
### PROBLEM DESCRIPTION
Hello,
I am trying to send "Energy Total" to the KNX Bus with my NOUS A1T plug.
Looking at the KNX specs "Wh" are supposed to be sent with the datatype 13.010 (which…
-
Hi @Supergiovane
**Describe the bug**
I am using the node-red-contrib-knx-ultimate node to read from the bus in Universal mode. The output is written to a log file (as decribed in #344)
It works…
-
Hello :) First i would like to say THANK YOU for this awesome integration..
**Describe the bug**
I am able to control kelvin in the tunable white tab, but in my ETS debug monitor i always get 1322…