-
### Code of Conduct
- [X] I promise that i have used markdown syntax to make the `code` more readable which helps to fix the problem
### What happened
When using the script from [Staubgeborener/kli…
-
### What happened
I am using the `mkuf/moonraker:latest` Docker image to run moonraker inside Docker. Yesterday this image has been updated to a recent moonraker version (based on commit 73df63d). …
-
Moonraker sometimes has an error on first boot. This seems to be the offending line:
`systemctl show -p ActiveState,SubState --value klipper KlipperScreen moonraker ssh`
In Fluidd, it will look som…
-
X-Max 3 Firmware 4.3.10
OrcaSlicer default X-max 3 profiles
I am using the older firmware because the newest 4.3.13 firmware does not work for my particular printer. The Z offset does not save cor…
-
Klipper version: v0.10.0-387
Error:
```
Error loading template 'gcode_macro DEPLOY_PROBE:gcode': TemplateSyntaxError: expected token 'end of print statement', got 'DOCK'
```
Happens without any m…
-
Hi, before OrcaSlicer i used cura, and in cura are a plugin named "Connect Moonraker", it allow to power up devices configured in Moonraker.conf, for example power up printer and other device wheen th…
-
### Requested feature
Hello
I would like to see the filament type (like PLA, PETG, ASA, ..) in the fileviewer / preview of the gcode files.
And a question, but this is more specific.
Possible to…
cptcl updated
4 months ago
-
### What happened
can't seem to connect to printer with klipper/moonraker. attached is a klippy log:
{"error": {"code": 404, "message": "Not Found", "traceback": "Traceback (most recent call las…
-
Hi
I was unable to connect Moonraker by using URL http://192.168.1.69/, was timing out
I can however connect using http://192.168.1.69:7125
However, when I send a gcode to Klipper, Cura advises…
-
## Version of the moonraker integration
1.2.0
## Describe your setup
I have a rebuild tronxy x5sa pro (dual extruder 2in 1) with Klipper (v0.12.0-192), Moonraker(v0.8.0-377) and Mainsail ru…