-
Hello, I’m trying to communicate 2 Arduinos nano with RF24 antennas. I’m using a A1117 to take the 5v port to 3.3v on both arduinos.
Here is the radio.printPrettyDetails() and the code of my ardu…
-
Hi, I'm trying to get this on my Raspberry pi working, but I've encountered some problems.
I have a Raspberry pi 3B+ with Raspbian Buster fresh installed with the official NOOBS from RPi website. (Al…
-
Hello !
I'm using Lib 1.3.3 with a nRF24+ module from Sparkfun on an Adafruit ItsyBitsy 32u4 8Mht board.
After a deep sleep the RF transmission become slow.
Video: https://youtu.be/DRIaGC7TSn…
-
-
Can code be modified to receive from more then 1 nrf24l01 chip? I just started looking at it might find my answer but figured I'd ask anyway. Tha is for sharing code I've been trying to figure this ou…
-
**Have you looked for this feature in other issues and in the docs?**
Yes, the future i'd like is partly like NRFIgnore (it would be one half) and the second part is limiting BT sensors per tas…
-
Constant `RF_PWR` looks to be wrongly defined.
https://github.com/nRF24/RF24/blob/a3ab7ddb075360deac54fe2c8e2fab286793d21c/nRF24L01.h#L79
The data sheet claims the `RF_PWR` bit location is 2 (p…
-
Hello
I'm trying to run RF24 Network in raspberri Pi 3, in python,
Follow the installation instructions for the RF24 and RF24 Network libraries
But when executing the example codes of the pyRF2…
-
I’m trying to change some of the default options (using the same command that worked with an older version of the code). The pingpair_dyn example runs as expected, but when I add the following line...…
-
Both the Eachine E010 and the JJRC H36 65mm Quadcopters are now being issued with Revision 5 (REV5) circuit boards (which are red colour, all previous being green).
Reason for the change unknown, j…