-
## Describe the question or issue you are having
I successfully connected a Heiman smoke sensor. I would like to know if it is possible to remotely turn the alarm off over the Rest API? I could not d…
-
## Describe the question or issue you are having
I configured a wake up alarm. I set up a secen for that:
![grafik](https://user-images.githubusercontent.com/87267/108739552-0a369d80-7535-…
-
I've added this ZigBee socket to my Hue app, and subsequently configured homebridge-hue to show it:
{
"platform": "Hue",
"users": {
"xxx": "xxxx"
},
"lights": true,
"link…
-
The Raspbee was up and running for more than a year. No recent update or reboot. The Raspbee suddenly lost the network connection and since then I cannot join the network anymore. I already did reboot…
ma-ca updated
3 years ago
-
## Describe the bug
I have 2 Sonoff SNZB-03 Motion Sensors installed in my enviroment. Both of them recognize motion even though there is no motion.
I can not see any regularity. The motion i…
-
Occasionally a light (mostly a Tradfri GU10) gets unavailable in the Phoscon app and can not be switched off/on via Phoscon (or HASS). Using deCONZ 2.05.55 and firmware 262F0500 on the Conbee now, but…
-
I created two sensor controls in phoscon app for my corridor light group. One is active during daytime and the other from dusk till dawn.
Now there is a strange issue with sensor control by night.…
-
Hello, ATM when you install deconz you have theses messages
```
Important: enable_uart=1 should be set in /boot/config
Important: /boot/cmdline must not contain console=serial0
```
But this i…
-
Looking to either supplant or re-open #1672.
Looks like the necessary info is in that issue, but please let me know if I need to provide more!
-
## Describe the question or issue you are having
## Screenshots
## Environment
- Host system: (Raspberry Pi / PC / NAS)
- Running method: (Raspbian / Ubuntu / Home Assistent …