-
Lista de posibles microcontroladores:
[Microchip dsPIC33EP512GM304](https://www.microchip.com/wwwproducts/en/dsPIC33EP512GM304)
[Microchip ATSAM4SD32C](https://www.microchip.com/wwwproducts/en/A…
-
It's all in the title. Firmware was updated just before with the required options.
Anything I should test?
AFAIK the absence of `pages_ready` is because of CDC serial hardware
```
$ cat prin…
-
Hi every time I use the M102 S-1 or M119 Command klipper shuts down I'm using a CR10S Pro V2 swapping from a BLtouch
[klippy (2).log](https://github.com/markniu/Bed_Distance_sensor/files/1372927…
-
Thank you for the work last week with micros() on trying to get the Renesas platform 48 MHz Arduino R4 boards to run the SDI-12 library. When we updated the SDI12 library, the examples would compile …
-
### The problem
I have the Wifi-NodeM (a NodeMcu like board - some strange clone with 1MB flash like this one https://allegro.pl/oferta/wifi-nodem-esp8266-16mb-wifi-arduino-wemos-nodemcu-1174089825…
-
During large probing sessions the back move is apparantly not executed correctly and motion continues to bed. Popping probe up to inactive state. (In this state it reports H as if it was triggered.)
…
-
We bought a Palette 3 Pro in order to provide automated spool swapping for a large format 3D printer we're working on. This printer uses 1.75 filament, and we normally run it with a 1.2mm nozzle and .…
-
He montado el doble extrusor en mi impresora Tevo Nereus. Tengo conectados los termistores y funcionan bien midiendo la temperatura de los dos extrusores.
Pero el problema lo tengo al conectar los…
-
I'm running uhd 3.15-LTS that I compiled myself. The txrx_loopback_to_file example crashes with a failed in pthread_mutex_lock when I have a transmit on one USRP and receive on another. The example ru…
-
I tried running docker-slim against an Alpine container which worked (creport.json exists and has files in it), but docker-slim complains that there are no data artifacts and the resulting image is un…