-
In continue of #687
Discuss how to concert micropython to javascript to have an online simulator where people can easily try LittlevGL in their browser without downloading anything.
-----------…
-
A few years back the MCU_SERIES_F4 & MCU_SERIES_F7 definitions were added to the stm port: https://github.com/micropython/micropython/pull/1410
They appear to have been since removed and/or largely…
-
I need a USB support which can transfer files from SD card or STM32F7 internal memory to USB via USB-HS or USB-FS. Is there any active example?
Thanks.
-
We are using AWS IoT for our new product and have been planning to use the AWS IoT embedded client, but before we use this library versus paying for a commercial MQTT client that supports TLS and can…
bpair updated
5 years ago
-
When the STM32F7 HAL is finished, we should write the board definition for RemRam 1.*.
-
### Description
I am trying to build a cutdown mbed to use as part of a bootloader. In order to make the final binary as small as possible, I have historically passed: -D DEVICE_SERIAL=0 -D DEVICE_ST…
deece updated
5 years ago
-
When I try to link [embed-rs/stm32f7-dicovery-rewrite](https://github.com/embed-rs/stm32f7-discovery-rewrite) with arm-none-eabi-gcc 4.9.3, I get the following error with cortex-m-rt 0.5.2:
```
er…
-
Tested on master commit 8cf8db3a73aa0658d728006e93d9ef5e0361a1b2, and tags v1.12.0, v1.11.0.
```
***** Booting Zephyr OS v1.12.0-1423-g8cf8db3 *****
starting test - Test gen_isr_tables
IRQ configu…
-
I exported **benchmark as "make_iar"**, and built benchmark.bin with no error.
the program hangs at "RSA-2048" cannot go through as following. but the benchmark.bin built from mbed-cli command with…
-
### Description
In order to support sensible SOTP and NV Store values, the STM32F7 platforms should have dual bank flash support.
At the moment this is not supported: https://github.com/ARMmbe…