-
**Device normal info**
- Brand
- Model
**Device info (please complete the following information, which can be found in [log](https://github.com/tuya/tuya-home-assistant/wiki/How-to-get-the-log)):…
-
**Describe the problem you have/What new integration you would like**
I have PLC board which use this LM75 i2c temperature sensor and I would like to use it. Basically this i2c sensor is very cheap a…
-
Since I started logging power from a sump pump with the PLF12 last week, I've been getting spurious Power readings, not more than once an hour. Sometimes it will go 6-8 hrs without a glitch, but mostl…
-
### Is your feature request related to a problem?
The current release only has ZBOSS RCP, but our old implementation uses ZBOSS NCP host.
### Describe the solution you'd like.
The ZBOSS libra…
-
### The problem
I have a problem with d1_mini board v.3 and Dallas sensor cooperation. Unfortunately, the results are very inconsistent. Sometimes I can see the sensor in logs, sometimes not. Failure…
-
### Latest firmware used?
... yes ... TASMOTA 9.3.1 and RF-Bridge-EFM8BB1-2019022.hex
### Information
....is in the subject
### Sniffed data
I use the "RfRaw 166" and get clean signals ...
…
-
hi would it be posible to add the ability to toggle the psu on/off.
thanks
martin
-
I entered valid SSID an Password in user_config.h. But ESP doesn't connect to Wifi AP. Configuration works fine with a lot of other tasmota devices. I only changed STA_SSID1 and STA_PASS1 in user_conf…
-
@Staars
Hi Staars, ;-)
found the AM2322 by ali exress:
https://nl.aliexpress.com/item/AM2322-Digital-Temperature-and-Humidity-Sensor-module-Replaced-SHT21-SHT10-SHT11/32698701164.html
He look…
-
### DESCRIPTION
datetime was shown some time but has vanished.
### REQUESTED INFORMATION
_Make sure your have performed every step and checked the applicable boxes before submitting your is…