-
Recently noticed strange behaviour. see images below.
Pijuice leds not working. Battery status not available.
[Image 1](https://i.imgur.com/yW1TM0t.jpg)
When i put my finger on the board (witou…
-
WiringPi is required for this library. However, the author of the WiringPi Library, Gordon, has stated that the WiringPi Library is now deprecated and presently the source code is not available for d…
-
Hi Tom,
z.Z. stelle ich gerade meine PCBs und INOs für Github zusammen - dabei biin ich dann auch über meine Sensor-Tests 'gestolpert'.
Für den BMP280 habe ich Dein momentanes INO-Script angepasst …
-
I have installed the LIB and everything worked fine.
I was able to run the examples in /examples-api-use without any issues.
Later I decided to start playing with the C code in the examples and I …
-
Building either an empty sketch or the blinky example from the Arduino IDE gives a build error in the Robohat MM1 libraries.
Here's the full error output.
```
Arduino: 1.8.11 (Windows 10), Boar…
-
Richard.... Do you see any issues with ServoBlaster working on a Raspberry Pi Version: 3?
-
Here is the test on the mcp2221 which looks ok
PS C:\Users\jason\python_dev\hello> set BLINKA_MCP2221=1
PS C:\Users\jason\python_dev\hello> python3
Python 3.8.1 (tags/v3.8.1:1b293b6, Dec 18 2019, 2…
-
Operating system: Raspbian Buster
Python version: 2.7.16 and 3.7.3
Pi model: e.g. Pi 3 Model B+
GPIO Zero version: 1.5.1
Pin factory used: RPiGPIO
See http://rpf.io/gpzissue for information on ho…
-
### Board and OS details:
```
pi@Apollo:~ $ cat /proc/cpuinfo
processor : 0
model name : ARMv7 Processor rev 4 (v7l)
BogoMIPS : 38.40
Features : half thumb fastmult vfp edsp neon vfpv3 tl…
-
I am using the adafruit bonnet to connect to this 64 x 64 matrix purchased from ebay
hub75 - left: R1 B1 R2 B2 A C CLK OE
right: G1 GND G2 E B GND LAT GND.
No D is marked, I have 18 a…