-
### Description
hand held extruder- like a 3d pen, but less portable. i already have a mockup from a bolt/pc heatsink, and im working on modeling a handle to hold an e3dV6 or similar, but as marlin…
-
Hi Stuart
First I want to thank you for this excellent project, and it's amazing to see how specially the controller UI has evolved over time
I really like the 4.4 version of the cell modules, bec…
-
Hi,
do you have a f BOM with source where you can buy? I ordered a small OLED from Aliexpress, but this is not working with your code. I think the best is to use the same sources to order some.
-
Need to learn about the arduino/ CANduino interface and ensure that the rear power distribution PCB is correct.
-
I am slightly confused about [the documentation on ADC usage](https://github.com/SpenceKonde/megaTinyCore/blob/master/megaavr/extras/Ref_Analog.md) for battery monitoring. Based on the schematic below…
-
I tried everything you have listed and ran in to the same thing you listed on the README -- that running at 3.3v didn't work. Just wondering -- why does it need 5v? I don't see anything in the datashe…
-
Hello,
I am trying to get the MAX3421E to connect to a MSR90 magstripe card reader from amazon. However, the light on the card reader blinks continuously, signaling that it is not connected. I am r…
-
https://github.com/MCUdude/MicroCore/issues/54
```
In file included from /root/Arduino/libraries/FastLED/FastLED.h:51:0,
from /root/Arduino/RGB-HUE-RR/RGB-HUE-RR.ino:5:
/root/Ar…
-
*Created by: chenz*
The knowledge how the device database came to be seem to be lost in the ether. It was clearly extracted from the Windows software somehow.
I have [here](https://github.com/chen…
-
LFO using attiny. But use LDRs to smooth and mix
use two ( or three ) ldrs with different responses and mix together or have separate outputs
maybe 3 ldrs?
Technically its not all that different…