-
# Bug Report
## What happened
When a lightbulb has a transition enabled, even a small one (0.5 seconds), and a parameter is set (like brightness), zigbee2mqtt publishes the requested value i…
ghost updated
4 years ago
-
This is not an issue but more a FYI or TBC/To Be Confirmed
In very short: it seems that with the lastest firmware(s???), "connect P04, P06 and P20 to GND" is not needed anymore.
For memo, "conne…
-
This idea came from developer discussion between @Adminiuga & @puddly in https://github.com/zha-ng/zigpy-znp/issues/10
Would it be possible to script a "backup and restore" migration feature/functi…
Hedda updated
4 years ago
-
Hi,
I found this website via google:
https://www.zigbee2mqtt.io/information/connecting_cc2530.html
Seems this is not linked on the main page under https://www.zigbee2mqtt.io/
Any specific reas…
-
I tried to replace my CC2531 coordinator yesterday with a zzh! CC2652R. After a few start problems (ELIFECYLE), which apparently can be caused by the antenna, I finally got Z2M running with the stick …
-
Can the bellows library be made to support newer EZSP serial protocol such as EZSP v6, v7, and v8 when used with ZNet 6.x on Silicon Labs EFR32 (Mighty Gecko family) based Zigbee radio adapters?
Se…
Hedda updated
3 years ago
-
Hallo, I flashed a cc2531 with router-cc2531-diag, but the red lamp flashes all the time only.
I see in zigbee2mqtt log synonymous nothing that a router has connected.
-
@omerk Can I suggest you look into distributing ZZH FW binaries via Koenkk Z-Stack-firmware repo?
- https://github.com/Koenkk/Z-Stack-firmware/
- https://github.com/Koenkk/Z-Stack-firmware/tree/…
Hedda updated
4 years ago
-
Hello,
converted forum https://zigbee2mqtt.discourse.group/t/adding-new-support-for-hive-signal-booster/893 issue
I've added a Hive Signal Booster following the instructions from https://www.zig…
-
Hi all,
i just got a new HS1SA smoke detector and have trouble getting it to work properly. Pairing is ok and the battery and linkquality messages too. But if i press the test button or activate th…