-
Hello friends,
I have a camera Misecu IPC-BT621A-20H, based on chip hi3516cv300. But sensor is SOI F22.
After flashing firmware I see:
**Hardware**
Processor hi3516cv300
Family hi3516cv300
S…
-
The example in the config.ini is lowercase
> { "dc": { "power": 321.6, "voltage": 52.6 }, "soc": 63 }
The resulting warning is mixed-Case
> {"Dc":{"Power":321.6,"Voltage":52.7},"Soc":63}
Sen…
-
I'm curious what type of wire you used for the power runs. You described running 24v through the air ductwork. That may or may not meet electrical codes (zillions of factors there, and I'm not an elec…
-
Hi folks,
I'm just in the process of commissioning our Cerbo GX system and today I've hooked up an AC Meter (ET112), setup in 'Grid Meter' mode, I'm using Guimods which I'm loving - but I'm having …
-
### Description of the problem
Result are not consistent between upload and downloads like reported elsewhere on the forum (https://github.com/bb-qq/r8152/issues/296) and not reaching the theoret…
-
### Issue Report Checklist
* [X] Searched the [issues page](https://github.com/e2nIEE/pandapower/issues) for similar reports
* [X] Read the relevant sections of the [documentation](https://pan…
-
Hi, when you moved the DC to the right something happened with the visual current from the Alternator. It goes into the Alternator.
-
**Platform on which you observed the bug:**
- [x] Android
- [ ] iOS
- [ ] Other
- [ ] Platform is not relevant for this bug
**Device on which you observed the bug:**
- [ ] Polar OH1
- [x] P…
-
Hi Ray,
I've noticed that the PTDF matrix generated by `makePTDF` sometimes displays entries with absolute value larger than 1.
Two cases where this happens: **case145.m** and **case300.m**.
…
-
One goal of Caliptra is to provide a firmware signing scheme for defending against attacks from quantum computers. Currently, only stateful PQC signing algorithms are approved by NIST. Caliptra has ch…