-
Hello Tertius,
First of all, thank you for your work and developing this software.
After managing to configure the MQTT server this is what I am getting when trying to connect to my control panel.
…
-
Currently the `Manufacturer Name` and `Product Name` fields of DIMM FRUs fed to the BMC contain raw binary data from `Manufacturer ID Code` (bytes 320-321) and `DRAM Device Type` (byte 2) fields of SP…
-
There are currently a range of places within the STIX model that involve information around human-oriented actions or action decisions.
The most obvious is the COA construct itself but it would also i…
-
Hello! I am having an issue with the plugin where I cannot load and print files.
I started with a fresh OctoPrint install, ran the setup script, soldered the serial connection onto the motherboard, …
-
```
What steps will reproduce the problem?
1. Wifi internet from two iPhone does not work. Not always on both iPhones at
same time. Wifi symbol is seen on the top of iPhone but internet does not work…
-
Hi all
I am trying to flash a BSD34 smart socket. I have downloaded the latest tuya master built using git. Working on an RPI 3B. I can connect the socket using the normal smart life app. I did thi…
-
## Introduction
Recently I acquired a few of the Meawow MHO-C122 (2AWMOMHOC122) sensors for a bargain price.
Hoping I was able to scrape the sensor data from the advertisement or basic readout of so…
FaBjE updated
8 months ago
-
My LoRaSerials are unusable for RTK work. The latency (age) of my RTK solution, as report by the Facets, is very unstable when using the LoRaSerial radios. It will work for a few minutes, then the com…
-
```
What steps will reproduce the problem?
1. Wifi internet from two iPhone does not work. Not always on both iPhones at
same time. Wifi symbol is seen on the top of iPhone but internet does not work…
-
Hi all,
I'm adding a bunch of issues right now and wanted to discuss my intent here.
First of all, anyone should feel welcome to edit, move, or outright delete any of the issues I'm opening if …