-
Hello,
I have ordered board with wemos from bbqkees. It is preinstalled with 1.6.
Here is the setup I have :
Buderus GB162 with RC300 and Web Gateway KM200
from KM200 and main screen, I got …
-
#### Which modpack version are you using?
2.0.4.6
#### What do you suggest instead/what changes do you propose?
So one concern I and others have brought up is how powerful light fuel is, in two mai…
-
Per MJW comment, took example file that had AirLoop and ZoneHVAC Equipment and added output variables Zone Air System Sensible Heating Energy and Zone Air System Sensible Cooling Energy and ran with v…
-
When I enter devices:
```
These 2 EMS devices were detected:
Bosch Easy (DeviceID:0x02 ProductID:206 Version:01.08)
RC30/Nefit Moduline 400 (DeviceID:0x10 ProductID:78 Version:03.01)
```
W…
-
Since eneco shut down their old access point domoticz needs to work with the new api. Can someone look into this?
### Issue Guidelines
Before opening a new issue, please review the following:
…
-
**Describe the solution you'd like**
Does somebody know if Buderus RC300 (see http://documents.buderus.com/download/pdf/file/6720804905.pdf) is also supported by the project? It seems that this modul…
-
**Bug description**
I get unrealistic and seemingly random values from the boiler.
Here a few examples:
```
(16:08:29) Return temperature: 67.0 C
...
(16:08:29) Flame current: 5.8 uA
(16…
-
With version 1.8.3 my RC35 thermostat was recognized by using the ems protocol ( tx_mode 1)
With version 1.9.0 and 1.9.1b the ems protocol craches the gateway :
System Logging set to None
System…
-
Hi @proddy
I just udgrade to the lastest dev version today. Here are three comments:
* Failed Read attempts SM100 (complete log see bejond)
````
Read failed. Retrying attempt 1/2...
(00:18:11.…
-