-
I have found discrepancy on the CrowPi2 specific statements in the **config.txt** file.
```
hdmi_force_hotplug=1
max_usb_current=1
-
Hi, is there a way to be able to turn off HDMI info on a HX60V? Firmware version 2.10
-
Hello, great repository. Thanks for this. 👍
I have a question with the 3th party ffmpeg version:
It is possible to run ffmpeg with the HDMI data as input and use h264 with hardware support ?
-
Hi! This is an awesome project. I built up a board using Palle's schematic, and it works great on my monitor and also 2 older TV's I have. However, on the two Vizio TV's I have it does not work. Ap…
-
I installed the following debs on a clean debian 12.5 installation
![image](https://github.com/user-attachments/assets/b30d9f3f-33ee-4bc8-8d92-b7c058d572bf)
and after it boots up i can see the log…
-
Good day. Thanks you for your library, it seems like a big work :-)
Unfortunately it did not for me yet :-)
I tried to run `square` as written in README for my IPS 240x240 ST7789 small display
…
-
I cannot get HDMI to work while in intel mode. It may be that the hdmi port is connected to the nvidia chipset. My laptop is an acer nitro 7 with a gtx 1650.
-
I have [this](https://a.co/d/bHlh0FM) screen which I know works and I have previously used with KlipperScreen. When I plug it into the Manta, it powers up but says there's no HDMI signal. I've tried s…
-
4月21日版本的Armbian经测试无法通过HDMI输出。
我将该版本的armbian刷入一张tf卡,插入原来运行batocera v38一切正常的板子,但是hdmi接口无输出。连接ttl后可以通过putty看到系统正常启动。
尝试将系统刷入EMMC问题依旧,尝试切换23年12月1日版本的Armbian,问题依旧存在。
不过我手上还有以前版本号23.8.1的armbian,hdmi输出正常。…
-
I have the camera Sony SLT-A77V and I have used the app with Tweaking mode. It doesn't work beacause I can't switch between 50/60 fps.
Also I have a question for you. Is there any chance to includ…