-
**Application Version**
**Platform**
**Printer**
**Steps to Reproduce**
**Actual Results**
**Expected results**
**Additional Information**
-
After swapping to Marlin 1.4.6 on my Anycubic I3 Mega S (stock drivers) it worked fine to start with.
Now i suddenly get these layershifts (see pic)
Belt is not loose. the print stick to the bed l…
-
hi
I have a Problem with My Cabeling.
first some information about my system:
Anycubic I3 Mega 750W Pc PSU RPi3b wired 5v from psu.
And now i will wired the relay 8 Channel Bord to psu For the el…
-
I am running the current bugfix-2.0.x branch on my Anycubic I3 Mega (pulled a few minutes ago) and there is severe layer shifting on the Y-Axis when I have S-Curve Acceleration enabled (everything is …
-
### Description
I have installed a genuine Bltouch on my Anycibic i3 Mega according to [this](https://cdn.thingiverse.com/renders/88/ab/35/72/87/ec7b446903558be2ad5d1b41d37230cd_preview_featured.jpg)…
-
**Application version**
4.6.1
**Platform**
Windows 10 X64
**Printer**
Anycubic I3 Mega S
**Reproduction steps**
1. Created a custom material as a copy from PLA temperatures as function
2…
-
Hey. Du schreibst ja dass das Mesh nach einem neustart gerestored wird. Muss ich da noch die beiden Commands im gcode nach G28 einfügen oder sogar g28 und die beiden meshbefehle weglassen? Sorry für d…
-
So, a few weeks ago I finished building my prusa i3 rework: that uses an arduino mega 2560, a RAMPS 1.4, and it's running marlin. I purchased a raspberry pi to run octopi and get rid of the designated…
-
i need help, the marlin is for my Anycubic i3 mega, edité los pines de la SKR 1.4. Thank you
**Error:**
Log Output
```
In file included from Marlin\src\inc/MarlinConfigPre.h:51,
…
-
### Description
The Firmware does not compile for the MKS SGen v1.4
macOS
Platformio
### Steps to Reproduce
1. Copy/Replace the suggested Configuration.h and Configuration_adv.h (Anycubic…