-
Hello!
I'm trying to setup mlx90640 i2c device using CH341T-V3 usb stick. When device opened via ioctl command I get following:
```
I2C device tree: '/dev/i2c-7'
Starting...
Configured...0
r…
axet updated
6 months ago
-
Below is the LabRAD node log:
```
2016-09-11 00:55:44-0500 [-] SIM900 mcd-adr3 GPIB Bus - GPIB0::2::INSTR::SIM900::4 device name: 'STANFORD_RESEARCH_SYSTEMS'
2016-09-11 00:55:44 - labrad.gpib_device_…
-
```
paul@PWC2:~$ hamster
Traceback (most recent call last):
File "/usr/bin/hamster", line 40, in
from hamster import client, reports
File "/usr/lib/python3/dist-packages/hamster/client.p…
-
I have a standalone automotive ecu with obd2 can bus protocol and i can change the baud rate speeds on the fly.In the other hand i use an esp32 with built in can bus controller to read the PID (RPM,VS…
-
Can you share a little example about hoe to scan devices in the bus ? 😵
i have test your sample
from ebpfcat.ebpfcat import FastEtherCat
master = FastEtherCat("eth0")
await master.connect()
awa…
-
Hi
Thanks for this very useful repository.
But I find that Raw interface repository doesn't write on Can bus.
I asked for this issue because you mentioned in Readme that it read in any CAN mess…
JeyP4 updated
4 years ago
-
On a fresh download and install of EasyDiffraction Version 0.9.8 (13 nov 2024), I got an error message saying that the "MaintenanceTool quit unexpectedly".
I donwloaded the installer from the EasyDi…
-
## DESCRIPTION
Introduce cross version/cross fork integration testing infrastructure. With the compatibility version release and planned new major version release, it will be good to improve the test…
-
I connected the Wican module to my MQTT broker. Now, I want to map some specific data to readable names like "doors locked," "which door is open," or "key in ignition." Where do I start? I've been abl…
Almer updated
1 month ago
-
Quick test makes it look like a flatpak exclusive issue. Here is output from the command `flatpak run com.tutanota.Tutanota`. Performed steps:
1. Launch Tutanota
2. Send email to self (from web c…