-
### Problem Statement
We have the Jira integration configured to create Jira tickets when a Sentry Issue ramps up past a certain point. We also have it configured to close the Sentry Issue when the J…
-
_Note: I've previously asked this on [Spectrum](https://spectrum.chat/artillery-io/general/rampto-takes-longer-than-specified-and-ends-too-early~f87f0d5b-6512-4f36-9ab2-19247e4ef573?authed=true) but g…
-
### Describe the bug?
Currently the `ShadowRampMaskOffset` and `ShadowRampMaskScale` properties of the `XiexeToonMaterial` do not seem to function properly.
### To Reproduce
* Create a new `XiexeTo…
-
I've developed a device to ensure that filament is constantly flowing into the machine properly. If the filament stops flowing for any reason (i.e. empty, clogged, jammed) the print will go into a pau…
-
Font size differs for some text styles between current Salt and Salt Next. We need a solution within Figma that enables font size to be controlled by a theme selection so designers are not required to…
pseys updated
2 weeks ago
-
Hello,
When I run this command ``xcalib -i -a`` screen gets inverted for second and then it gets fixed.
I have no idea how to debug this since I have no ideas how it works.
Any suggestions…
-
This [Github Repo](https://www.youtube.com/watch?autoplay=1&v=c9bUJ6drLbk&feature=youtu.be) tells me that glut is already deprecated, but what about this?
GLFW is an Open Source, multi-platform lib…
-
@jasonwebb there are some arduino 328 grbl forks that have reworked the 'spindle_control.c' to provide servo control for the pen lift. I just got a Mega for building a second wall plotter. The servo i…
-
I am using grbl on the MKS BASE 1.6 board. It is basically an arduino mega combined with a RAMPS 1.4 on a single board. Currently available for around $30 (with 5 A4982 drivers installed), so its pret…
-
I have TMC2209 v1.2 drivers connected to Ramps 1.4.
Everything works fine except ability to trigger end-stops using sensor less homing
Can somebody tell how to connect BTT tmc2209 v1.2 diag pin to r…