-
Hello!
I followed the installation guide which worked very well for me and I did not get a single error message during the whole installation and configuration process. So to begin with a big THAN…
-
Doorbot5 (the shutter) isn't responding to tags at the minute. The Pi is up fine, and there's power to the RFID reader, but no cards are being detected. Luckily I was first in today and had my key w…
-
If I'm not mistaken, you do not cover tracing tags in the sample application nor is there any documentation whatsoever on the method, let alone the library in general. If I'm wrong, can you please poi…
-
## Specific
As part of the normal attrition rate, the number of kitchen passes has dwindled to one, with no tag. We either need to cancel and replace the missing tags, or recover them from their cu…
-
Could you add support for mifare mini? Can not copy the dump. The program does not see one of the keys in the sector.
-
[ ] One cube needs a new acrylic panel
[ ] One cube isn't working
[ ] The RFID reader needs to be reattached to its box
[ ] Get some garage-type LED panels that could be attached to the inside of t…
-
First make sure you read the test guidelines here: https://github.com/Wiredcraft/test-pm
This task will be followed up asynchronously over a few days and should not take more than two hours in tota…
-
### Hardware:
Board: Sparkfun ESP32 Thing
Core Installation/update date: Jun 8 2016 (of the chip)
IDE name: Arduino IDE 1.8.6
Flash Frequency: 80Mhz
Upload Speed…
-
Is it possible to stop playback on rfid-remove instead of additional rfid to stop?
-
Looks like an issue with dwc_otg was introduced with 4.14.x versions - 4.9.80 does not show issue.
When booting RPi 3, 2 or ZeroW with 4.14.x versions with a "C-Media Electronics Inc. USB PnP Sound…