-
i was wondering if it is possible to assign a username/password for clients that would connect to the broker?
-
I have a large sketch that worked a couple days ago, and now it doesnt after adding FS.h to it. All I did was add the ability to read/write SPIFFS, and as far as i know, it had nothing to do with my m…
-
> Have you searched for existing (open and closed) issues describing the same problem?
Yes
**Describe the error**
It seems that the non existing settings can not be accessed and the hash can no…
-
Hardware: Olimex ESP8266-dev
ArduinoOta: v5.11.1
I'm experience network problems during OTA updating process. Basically when I'm uploading the sketch to my esp8266 the local network (on all devi…
-
Bonjour,
serait-il possible de préciser dans le readme une version précise pour chacune des librairies utilisées pour la compilation ?
Car là, je me heurte a des problèmes de compilation sans fin.
…
-
I made some changes to increase transfer speeds to the range of 100 - 300 Kbytes/s. Also reduces blocking so ftp can co-exist with other services. Let me know if you want a PR.
https://github.com/b…
bbx10 updated
7 years ago
-
Never connects to wifi.
-
I've got an ESP32 with T-display. So I believe I've set everything up right, but maybe I'm missing a step. I got the right version of ESP32 board, I've added the -w and -zmuldefs to where they needed…
-
#### Description
When testing the reimplementation of the ESP866 port based on the ESP8266 RTOS SDK in PR #11108, the following open problems were identified (https://github.com/RIOT-OS/RIOT/pull/1…
-
I can connect to my MaixPy via serial cable and I get the MaixPy welcome screen, but it doesn't respond at all to my keystrokes. I'm running minicom on Linux Mint connected to /dev/ttyACM0 at 115200 w…