-
It would be great to have complete HAL for the STM32F7, including SPI and working I2C.
-
The OTG_HS port on STM32F4 SoCs can support both full-speed USB transmission with its integrated transceiver at 12Mbps, and high-speed USB transmission at 480Mbps with the external USB phy. So, the p…
-
I ran the Wheatstone benchmarking and the result is below
Loops: 1000 Iterations: 1 Duration: 9781 millisec.
C Converted Double Precision Whetstones: 10.22 MIPS
Actually STM32F7 is 216MHz proce…
-
Hello there,
I'm trying to get the new JTAG feature on Buspirate V4 working. So far no luck:
- JTAG Target is an OLIMEX STM32-P407 Board.
- BPv3 (with BPv3-firmware-v6.3-r2151.hex) and openocd …
-
Working example modm at 4ae989ee0
```
scons program verbose=1
scons: Reading SConscript files ...
scons: done reading SConscript files.
scons: Building targets ...
openocd -s "/XXXXXXXXXXXXXXXXX…
-
How can i load images on STM32F7. There is an example for loading images and its working fine but how can i load my own image on display.?
-
### Description
I am using a custom board, roughly based on the NUCLEO_F767ZI. Most of the pinout is the same, but for example for RMII_MII_TXD1 I am using PG14 instead of PB13 since this made much m…
-
any plane to port littlevgl to stm32f746 diccovery board?
-
### Description
- Type: Bug
- Priority: Major
## Bug
This command fails to compile (with traceback) (here is the job (internal link) http://mbed-ci-master-2.austin.arm.com:8081/job/examples_…
-
ADC11 id should be 11 instead of 1.