-
@thegroove Please consider adding automatic network discovery of this so can be discovered by Home Assistant’s ZHA integration:
https://community.home-assistant.io/t/zha-automatic-discovery-of-zigb…
Hedda updated
2 years ago
-
Hello gemu2015
I would like to use the display (SS1351 128x128 OLED Display).
How is the display connected?
About 4-SPI or I2C?
I2C
SLC = GPIO 5
SDA = GPIO 4
Would that be correct?
How is th…
-
I've been trying to put my Sonoff Mini in DIY mode, but without success.
I've set my Sonoff Mini with the DIY mode v2 and was able to connect to the network `ITEAD-XXXXX`, access the web interface …
-
I entered valid SSID an Password in user_config.h. But ESP doesn't connect to Wifi AP. Configuration works fine with a lot of other tasmota devices. I only changed STA_SSID1 and STA_PASS1 in user_conf…
-
I'm trying to get an MQTT dehumidifier working with this card (https://www.home-assistant.io/integrations/humidifier.mqtt/).
After configuration, the target humidity slider won't appear on the card…
ivlis updated
2 years ago
-
Hello,
I have a Sonoff dual R2 with Espurna 1.13.2 to control a window shutter.
Configure two switch (open and close) is easy and work well but for shutters is better platform "cover".
![image]…
-
Dear All,
When I press a button, I have multiple "PRESSED" events and when I release it, I have nothing.
How can I do to get one event "PRESSED" and one event "RELEASED" instead ?
My hardware con…
-
@Staars
Hi Staars, ;-)
found the AM2322 by ali exress:
https://nl.aliexpress.com/item/AM2322-Digital-Temperature-and-Humidity-Sensor-module-Replaced-SHT21-SHT10-SHT11/32698701164.html
He look…
-
Timeouts die beim neuen httpGet Block entstehen werden immer als Error im Log aufgeführt.
Wäre es möglich den Log-Level (Info/Warn/Error/Ohne) einstellbar machen?
-
### Is your feature request related to a problem? Please describe
Ich habe den Victron2MQTT an einen Victron SmartShunt. Dieser hat nicht die Möglichkeit einen Ausgang oder das Laden abzuschalten. Au…