-
Hi , I would like to install a destop for deconz gui on my ubuntu x64 server (headless now)
I tried one time and the phoscon app was creating a new network from nothing.
I did disable the dec…
-
After working through the installation steps i am not able to load the config-page for the Raspbee module to add the zigbee lights.
serialport is on; loginshell is off
deconz.service was change a…
-
Hi, sorry if I'm using the issue tracker to ask a question but I'm not sure where else to ask it.
I have a Hue Bridge 2.0 and a RaspBee, everything is linked to Home Assistant.
I use the Hue Bri…
-
Home Assistant 0.91.2
Raspbee firmware 262f0500
So I finally received my replacement Raspbee (first one had died) and added a mix of OSRAM Lightify RGBW bulbs, strips and recessed lights and a few…
-
My rpi3 gateway was offline for more than 48 hours due to an SD card failure.
I've reinstalled everything on a new SD card and restored settings by using the Phoscon load backup option.
All my sen…
-
https://www.jeedom.com/forum/viewtopic.php?f=184&t=33573&hilit=abeille&start=1820
-
(On request, moved from [zha-device-handlers](https://github.com/dmulcahey/zha-device-handlers/issues/90) to here)
HASS.io version: 0.93.2 on VirtualBox host
Zigbee Hub Device: Conbee II, latest f…
-
I see problems with IKEA meshing (i pressume that's the problem) together with other devices from other makers for example i see following cases quite often :
1. I can't control my osram lightpole …
-
Hi, I switched from RaspBee to Conbee and tried to load my raspbee backup in conbee.
But the startup routine loops with these logs:
`Feb 26 21:32:28 server systemd[1]: Started deCONZ: ZigBee gateway…
-
**Home Assistant release with the issue:**
Haas.io 0.70 / 0.70.1
**Last working Home Assistant release (if known):**
I think 0.68/0.69 was ok
**Operating environment (Hass.io/Docker/…