-
**_Reported by Javier B Perez:_**
Reference hardware = either
Galileo2 with the TI2520 connected to SPI
OR
Arduino101 with TI2520
(Imported from Jira ZEP-25)
-
**_Reported by Dawei Wu:_**
*Details:*
Both A101 and quark se board have this issue.
serial console output on A101:
```
shell> Run IPSP sample[bt] [WRN] set_static_addr: Using temporary static ra…
-
**_Reported by Dawei Wu:_**
*Details:*
This issue was not reproduced in *master* branch , but in *RC4*
serial console output:
```
shell> Run IPSP sample[bt] [WRN] set_static_addr: Using temporary…
-
- Type: Bug?
cc @MarceloSalazar
Hello, I'm having a problem with the mbed connector website. Our [mbed-os-sensor-node](https://os.mbed.com/teams/Avnet-Silica/code/mbed-os-sensor-node/) project …
-
Hi,
I am currently stuck with a problem similar to the one discussed in #153 and a little help would be a real godsend!
I am using a couple of SmartRF modules plugged via USB on two different Linux …
-
Here is what i got at serial port
[INFO][brro]: PANID: 691
[INFO][brro]: NET_IPV6_BOOTSTRAP_AUTONOMOUS
[WARN][brro]: Security NOT enabled
[DBG ][core]: NS Root task Init
DBG ][core]: NS Root ta…
-
### Description
When sending single data pack by command `echo "hello" | nc 192.0.2.1 4242` to [TCPEchoServ4.js](https://github.com/01org/zephyr.js/blob/master/samples/TCPEchoServ4.js), tcpserver …
-
_**1st edit: missing words **_
Hi, I am pretty convinced that in sicslowpan.c the number of fragment buffers defined by
`#define SICSLOWPAN_FRAGMENT_BUFFERS 12`
is too low.
I used the nc6 utility …
-
**_Reported by Dawei Wu:_**
*Details:*
Both A101 and quark se board have this issue.
serial console output on A101:
```
shell> Run IPSP sample[bt] [WRN] set_static_addr: Using temporary static ra…
-
**_Reported by Dawei Wu:_**
*Details:*
This issue was not reproduced in *master* branch , but in *RC4*
serial console output:
```
shell> Run IPSP sample[bt] [WRN] set_static_addr: Using temporary…