-
Platform adc clock setup uses period & prescaler (platform_adc_set_clock) (as does PWM setup), main timer clock setting has a fixed period. platform_timer_get_clock doesn't include the period in its …
-
### Category
Other
### Hardware
Heltec V3
### Firmware Version
2.3.11
### Description
Occusionally the heartbeat led flashes one sec on, one sec off. Then goes away after some min…
-
Hi,
I am converting some of our old recordings in the Open Ephys format to the flat binary format so that we can replay them in the Open Ephys GUI using FileReader. I managed to create the folder s…
-
I have a function to test which calls a function from another module twice
```
FOO_StatusTypeDef foo()
{
uint16_t value1, value2;
if (readAdc(CHANNEL1, &value1) != ADC_OK)
{…
-
### Describe the problem
A stray curly-brace in `//` comments or `#if (false)` sections causes the function prototypes generated during [the "sketch pre-processing" stage of the compilation operati…
-
Just got the AIY-vision kit and it worked fine at first. For some reason I did apt update and apt upgrade and after that it has been a long day of debugging, but nothing helps.
When trying to run a…
-
Running this code on an ESP32 returns mostly zeros (eg: 28 zeros and a few stray values). Running the same code on and Arduino UNO returns good values. Any ideas how to get this working on the ESP32? …
-
hello, in flame_sensor file, at line 39 you are calculating battery voltage while glow plug is on:
`float Battery_Voltage = (Batt_ADC * 0.003965927); //Measure the battery voltage while the glow plug…
-
@ChandiWitharana and Elias, I’d like your opinions regarding how to archive the PDG data and metadata for the IWP and water/glacier clipped datasets. Elias processed the .shp files last week, and Kast…
-
Currently, ADC value with fluctuate +/- 20 units when resistance is steady. This should no occur!
**Ideas**
- Lower the sampling rate / resolution in ADC config
- software averaging?