-
Since i upgraded to auto bed leveling i keep getting thermal runaway errors for my heat bed. The temperature readings freeze and after the THERMAL_PROTECTION_BED_PERIOD the printer disconnects. This i…
-
### Did you test the latest `bugfix-2.0.x` code?
No, but I will test it now!
### Bug Description
When attempting to do bed leveling sometimes the prover does not behave properly.
The probe deploys…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
I tried to build with platformio using vsstudio to use bltouch in my ender3, but I got an err…
-
On my bed it does the 4 point leveling, i've put it a little off on the left side just for fun.
But when i start to print after enabling everything just as the guide says it actually pushes the plate…
-
Hi,
I'm using Marlin with TAZ probe mod for auto bed leveling ( http://forum.lulzbot.com/viewtopic.php?f=16&t=166 ).
I'm encountering some difficulties having this mod working.
All is well wired and…
Couby updated
2 years ago
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
In GcodeSuite::G29() in [Marlin/src/gcode/bedlevel/abl/G29.cpp](https://github.com/MarlinFirm…
-
Don't know if this is working as intended, and/or if this is two issues, but it doesn't seem logical to me, and both relates to how values from M206 is used.
When auto bed leveling is enabled, endsto…
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
So after installing the BL Touch probe to my Ender 3 Pro (4.2.2), and installing newest Marli…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
Stealthchop wouldn't turn on for me on X, while on all other axis it would.
So i tried M569,…
-
My axis seem to be turning in the correct directions to compensate for bed level but not sufficiently to lay down a good first layer. As the photo shows in the Y+ direction the nozzle is too close and…