-
I tried to compile this version, and got the following error:
Arduino: 1.8.8 (Windows 10), Board: "Generic ESP8266 Module, 80 MHz, Flash, ck, 26 MHz, 40MHz, DOUT, 1M (no SPIFFS), 2, v2 Higher Bandwi…
-
Hi, thanks for your cool project. I got that little dude up and running.
Sadly the temperature is about 2-15°C too high and the humidity is 10% too low
compared to a synthetic hygro- and thermometer…
-
Hey,
in deinem Video zeigst du ein Board samt Kondensatoren und DC stepper. Könntest du dieses Board bitte auch noch uploaden?
Klasse Projekt, weiter so! Ich bin dabei einen BME680 an KNX zu bri…
-
DO NOT DELETE ANY TEXT from this template! Otherwise the issue may be closed without a comment.
-->
**Describe the problem you have/What new integration you would like**
The dht library includ…
-
**Operating environment/Installation (Hass.io/Docker/pip/etc.):**
Not applicable
**ESP (ESP32/ESP8266, Board/Sonoff):**
Not applicable
**Affected component:**
BME280 (and BME6…
-
The `ltr559` sensor gives an install error. Figured I'd let people know about it here.
```
pi@raspberrypi:~/breakout-garden-master $ sudo ./install.sh
Breakout Garden requires I2C. We've enabled…
-
Bosch has updated the library for BSEC and the latest version is v1.4.7.2.
Sketch **catena4460_bsec_ulp.ino** has been written based on BSEC software v1.4.6.0, so the sketch has to be updated to w…
-
I have 3 sensors for measuring temperature:
- DHT11
- DS1820
- BME680
while the two other sensors return the temperature around 21*C, BME680 returns 23.5*C. I know the two other sensors are no…
pswin updated
5 years ago
-
# Background
Adding a new field to a struct in a package is currently a breaking change. This means that adding a field to any public struct in a package requires a new major package version, creat…
-
Thanks to the BME680 sensor requiring a large amount of time to read and process the temperature reading, the current code requires a large delay after the BME680 sensor has been fetched. This needs t…