-
I have installed the 3.1 Bltouch onto an skr mini e3 v2/TFT ender 3 pro. I flashed the correct firmware from https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/tree/master/firmware/V2.0 according …
-
This problem is almost certainly the result of my error, but I want to see if there's any way to remedy it short of replacing the board.
What happened is that I accidentally shorted the Z end stop an…
-
When there will be a new version to Octopi 0.18?
-
I'm looking for support or at least and acknowledgement that the firmware is borked.
### Description
### Steps to reproduce
1. Load firmware that reads [firmware-ender3-bltouch-for-z-homing…
-
Please supply them is you want to sell this board...
-
Hey guys, another SKR 1.3 board "fried" by a thermistor touching something.
This is what's happening and what I've tried so far:
![imagen](https://user-images.githubusercontent.com/5612241/18708…
-
Error when assembling the firmware, I'm running Visual Studio Code 1.88.0 PlatformIO Core 6.1.14·Home 3.4.4
I can't figure out what the problem is
c:/.platformio/packages/toolchain-gccarmnoneeabi/…
-
In the actually documentation V1.0 are the wrong MCU Firmware configuration.
There are declared a bootloader offset with 8 KiB.
This creates issues and after compile tthis you can't get the serial…
-
Same as this ticket: https://github.com/bigtreetech/EBB/issues/88 which the OP closed because they found a workaround using a gpio from another port. That isn't an actual fix though and BTT needs to k…
Ixian updated
7 months ago
-
I have trouble with filament sensor. I added it and when I check on console with M119, it register filament sensor but, when I try to print still get error. Any idea?
![IMG_20230321_092205](https://…