-
This motherboard is not detected as MSI, any chance to include it?
Thanks!
-
Hello, I recently setup an enclosure with LEDs using the Enclosure Plugin. I decided to add an OctoScreen interface to my enclosure so I didn't have to go to a computer to start/stop prints anymore. A…
-
- [x] I confirm that this is an issue rather than a question.
## Bug report
First of all I'm aware I'm using CoreElec and you most likely will tell me to go to the CE forums an…
-
I bought such a controller: https://www.ebay.de/itm/RGB-CCT-RGBW-WW-CW-Steuergerät-Controller-ZigBee-kompatibel-LED-Lichtband-12-24V/123410333065
I connected a RGB Stripe (V+, R, G, B) and a 12V LE…
-
**Background:**
Behavior when setting a an RGBW light's `white_value` differs between platforms due to the fact that some HW supports a color and white simultaneously, this is for example the case fo…
-
I have a standard WS2812b strip of 24 LEDs, I have proved it works by connecting to a Arudino Nano and run some simple LED code.
I have tried with / without a level shifter.
Common ground (j…
-
Requesting access to the ZiGate LED control on a ZiGate radio via zigpy-zigate and/or the zigpy library?
Perhaps extend zigpy API so can also be used by other radio libraries too or otherwise only…
-
macOS 10.15.7 on Macbook Pro
Node.js v12.16.0
node-hid v1.3.1
Blink(1) mk2 connected via USB hub.
Shows up in HID.devices():
```node.js
var HID = require('node-hid');
var devices = HID.dev…
-
## What happened
The problem is slow response. LED lights are really slow (or fails)
Everything worked fine while i only had sensors on zigbee2mqtt and the LEDs on the Trådfri gateway.
Problems st…
-
## The problem
I have Hyperion NG running on an RPi3 (LibreELEC) (priority: 250). On another PC I have Home Assistant 0.116.2 (priority: 128). And on a 3rd PC I use Hyperion Screen Capture (Proto…