-
### Describe the problem you are having
Frigate keeps dropping connection to my Reolink Video Doorbell Wifi. My camera is on firmware version v3.0.0.2602_2308180. I was reading in another frigate t…
-
### System information
- Raspberry Pi 4 Model B Rev 1.2 4GB
- Coral USB Accelerator
- Raspberry Pi OS 32bit (Release date: May 7th 2021)
- libedgetpu version 15.0
- tensorflow lite 2.5.0
### D…
-
### Describe the problem you are having
In the latest update, frigate uses a lot of CPU. hardware acceleration for ffmpeg works fine, but the detector is high cpu usage. Сhanging the resolution of…
-
### Describe the problem you are having
Since it was recommended in the documentation I ordered this PC because I had problems with the TPU in a VM. The TPU now works great, but the hardware acceller…
-
### Describe the problem you are having
I have installed a Coral M.2 Accelerator B+M key in my NUC12 which runs ESXi.
Successfully passed through the device via ESXi to my Ubuntu VM.
But I ha…
-
### Describe the problem you are having
At 02:00 this morning the clock went back to 01:00 for the end of Daylight Saving Time.
For one hour, Frigate's log went crazy (6,512 entries) and all recor…
-
### Describe the problem you are having
Hi,
I recently added a second Reolink 520a camera to Frigate (the Living Room Cam below), replicating the original config for the first fully working cam …
-
### Describe the problem you are having
I have an Intel NUC with i5-1135G7 inside. preset-intel-qsv-h264 works as it should, since it's a >10th gen CPU. When I set the cameras to H265, preset-intel-q…
-
### Description
I am unable to get the Coral PCIE driver to load on a fresh Ubuntu 22.04.1 LTS VM. This VM is running on ESXi. The Coral PCIE device has passthrough enabled passing the device directl…
-
### Describe the problem you are having
I have 2 cameras on each side of a gate. The low down one 100% detects cats every time as they crawl under the gate.
However the camera on the drive doesn't r…