-
## Expected Behavior
When upload by WiFi -> Build&Flash an Aion TX unit, when the message says `Success!`, it should be flashed.
## Current Behavior
When upload by WiFi -> Build&Flash an Ai…
-
## Current Behavior
1. Make Model A and B. (or already been created model) using model match.
set different model ID A(ID 11) and B(ID 12).
2. Select Model A
Setting VTX Adminstrator (…
-
## Current Behavior
After accesing LUA script and press on other -> Matek RD24 connection got lost. Now I`m not able to regain connection with this module.
Other RX work without problems with this m…
-
## Current Behavior
When using the dynamic power setting, the module will sometimes switch to higher power levels when the receiver connects even though the arm channel has not been set to high.
##…
-
## Current Behavior
When trying to run the LUA script, an error occurs.
The radio displays an inscription:
"**Loading... ?/??? ?**"
After a long time, nothing else happens
**UPDATE
…
-
Good evening.
I tried to upgrade my Frsky X9d2019+ from its current OTX2.3 ans using the SDCard transfer the only result I got was:
* Edge Fw is on the flashing choice list on the SDCard
* OTX als…
-
It would be useful to hide the password of the wifi connection. On the right a button which makes the password visible.
Idea:
![Screenshot 2021-12-15 123632](https://user-images.githubusercontent.…
-
I used the following openocd command on Linux to wipe an ImmersionRC Ghost Atto for ExpressLRS installation:
`openocd -f interface/stlink-v2.cfg -f target/stm32f3x.cfg -c 'init; reset halt; stm32f3…
-
It would be nice to have the possibilty to see the telemetry (gps;speed;hight) on a laptop/tablet.
A subset of Mavlink should be enough for this feature.
kind regards
Christoph
-
See: https://github.com/ExpressLRS/ExpressLRS-Configurator/issues/72